The SmarTech 27DL3 is the antenna of choice for those who demand the best.

The improved design of the new version 2.0 has enabled the antenna to achieve remarkable levels of forward gain and F/B ratio.

A high-efficiency Gamma Match adapts the 27DL3 to 50 ohms (relative dielectric constant εr=2.0 @1 MHz - better dielectric properties than fiberglass and polyethylene, dielectric strength 600kV). The power rating is up to 5 kW (optional).


SmarTech Gamma Match SmarTech Antennas


The antenna has been designed with the best and most accurate numerical methods actually available. SmarTech numerical modeling takes into account the presence of insulators, boom and joints, so as to eliminate radiation pattern distortions.

Prototype stages are realized by iterative cycles of measurements and optimizations, until the convergence between numerical model and performance measured on the physical model.


Convergence of functions - SmarTech

The "closed ring" configuration and DC Grounded property, give special low noise qualities to the antenna due to the absence of electrostatic currents. Therefore, the SmarTech 27DL3 maintains its efficiency even in conditions where noise makes unusable other antenna systems.



ELECTRICAL SPECIFICATIONS
Gain 13.67dBi @20m (65.6ft)
Front/Back Ratio 30.64dB @20m (65.6ft)
Impedance 50 ohm
Power rating 3 kW (optional 5 kW)
Matching Method Gamma Match
3 dB Horizontal Beamwidth 71.9° @20m (65.6ft)
PHYSYCAL AND MECHANICAL SPECIFICATIONS
Weight 17kg (37.5lb)
Boom length 4.0m (13.1ft)
Rotation radius 2.5m (8.19ft)
Projected area [F=Flat - C=Cylindrical] F = 0.46 m² (4.9 ft²) - C= 0.18m² (1.9 ft²)




Antenna 3 el. Delta Loop 27DL3 SmarTech Antenna 3 el. Delta Loop 27DL3 SmarTech


The absence of electrostatic currents, together with Gamma Match decoupling function, offer a special protection against electric shocks to the RTX antenna connector. They're often cause of dangerous damages (or even dstruction) to front-end stages.

Antenna's main structure is made of aluminum and stainless steel parts in order to operate entirely in the elastic field. Thus, the structure is elastic and at the same time very robust.

Unlike fiberglass structures, aluminum systems provide considerable durability and better response to wind loads. This allows for maintaining the antenna's geometry intact, avoiding impedance mismatches and the resulting degradation of efficiency and overall performance.


27DL3 SmarTech Antennas


Thanks to its specific radiation patterns the 3 el. Delta Loop is suitable for both long distance DX and medium/short range contests. The antenna reaches its typical performances starting from small heights from the soil.

This antenna has a flat SWR curve covering 27 MHz at less than 1.5:1 SWR



The SmarTech Delta Loop antennas are designed to achieve the best configuration for maximum forward gain, improved Front-to-Back ratio, improved Front-to-Side ratio, and a cleaner radiation pattern. This is possible because simulation approaches are not constrained by the limitations of 50 ohm (or any other) impedance configurations, as is the case with direct feed antennas using coaxial cable. The constraints imposed by specific project impedances significantly limit the selection of optimal solutions, which result in the adoption of lower-quality configurations with greater performance compromises.
The Delta Loop SmarTech antennas, on the other hand, are designed using the most advanced calculation methods. The impedance matching is performed by a specific and high-quality gamma match system, ensuring the best signal transfer and extremely high efficiency levels of the whole antenna system.
Delta Loop Antennas SmarTech




MATERIALS

The antenna main structure is made of aluminum alloy EN AW-6060/82 UNI 9006/1 (Anticorodal 60/100), which provides excellent long-term durability against the most severe weather (ice, water, UV rays, fine particles, acid rain), and better resistance to heavy wind load.

The Delta Loop is supplied with stainless steel parts AISI 304 (Inox Austenitic UNI / EN 10088) and steel S235JR2 (UNI 100 series), certified according to 2000/53 / CE + RoHs standards.

Insulators are made of Polypropylene PPC 5660, resistant to remarkable thermic excursions (certified for temperatures from -20°C to +130°C), with high load at break (ultimate tensile strength 25Mpa), excellent abrasion-resistant and volume resistivity > 1018

The horizontal wire is one of the most important components of the antenna. Here flows the highest current and RF radiation is maximum. Therefore the quality of the material most determines the system efficiency.

For this, SMARTECH has focused its utmost care and efforts for the production of a specific, special wire consisting of 99.99% pure copper with antioxidation coating and insulated with a special polymer.

The wire is also used for military and aerospace applications because of its excellent dielectric properties (insulation better than glass), abrasion and tear resistant, UV rays resistant, chemical solvent attack resistant. IDT 8 kV. Operating temperatures -65+150°C.


High-Quality cable - SmarTech Antennas


The antenna is made to obtain the maximum electrical efficiency, the best mechanical resistance and durability, thanks to its high quality materials. It is also suitable for installation in mountain areas and coastal (corrosive) areas.

SmarTech antennas are designed with the minimum necessary electrical/mechanical joints. So, parasitic resistances are the lowest possible so as to minimize unwanted RF dissipations.

Costs include proper packaging, completion of customs documentation and shipping tracking 24/7. All products are shipped with the most important and reliable international couriers.






If shipping costs to your destination are not included during the ordering process, please contact us. We will send you a quotation for the fastest, safest and cheapest shipping solution.




Antenna 3 el. Delta Loop 27DL3 SmarTech Antenna 3 el. Delta Loop 27DL3 SmarTech

Here it is then my 3 element delta loop. Fortunately, building up was very easy thanks to the good supplied description. In 2 hours it was on the rotator, SWR adjustment went fine. From 27,000 to 28,000 mhz the needle did not come out of the corner. Local I am 3 to 4 S points stronger. Long distances also went perfectly. The day after 22 and 3 division spurred 5/9 in the log. TX and RX perfect.

Jeroen 19EK666 - Holland



Antenna 3 el. Delta Loop 27DL3 SmarTech Antenna 3 el. Delta Loop 27DL3 SmarTech

Ph. credits: Mr. Alex 165AT165 - SARDINIA IS.



Antenna 3 el. Delta Loop 27DL3 SmarTech Antenna 3 el. Delta Loop 27DL3 SmarTech

Ph. credits: Mr. Renato S. 1AT304 - Parma, ITALY



Antenna 3 el. Delta Loop 27DL3 SmarTech Antenna 3 el. Delta Loop 27DL3 SmarTech

Ph. credits: Mr. Antonio M. 1EK010 - Padova, ITALY



ELECTRICAL SPECIFICATIONS
Gain 13.67dBi @20m (65.6ft)
Front/Back Ratio 30.64dB @20m (65.6ft)
Impedance 50 ohm
Power rating 2.5 kW (optional 5 kW)
VSWR min. @50 ohm 1.0:1
Matching Method Gamma Match
3 dB Horizontal Beamwidth 71.9° @20m (65.6ft)
PHYSYCAL AND MECHANICAL SPECIFICATIONS
Weight 17kg (37.5lb)
Boom length 4.0m (13.1ft)
Rotation radius 2.5m (8.19ft)
Projected area [F=Flat - C=Cylindrical] F = 0.46 m² (4.9 ft²) - C= 0.18m² (1.9 ft²)

3 el. DELTA LOOP (27DL3)

  • € 476.00